Knowledge

What are the differences between stepper motors, gearbox stepper motors, servo motors, screw motors, and brake motors?

In the calculation of the temperature rise of the motor, the most important thing is to calculate the temperature rise of the winding and the core.

The single-phase resistance starting asynchronous motor has its stator embedded with a main phase winding and a secondary phase winding, the two windings and the axis being at an e

Taking the "three-phase star-bridge connection" commutation circuit shown in Figure 1 as an example, take a look at the electronic commutation process of "two-phase conduction star

The permanent magnet synchronous motor has small volume, light weight, high power density, high reliability, high speed regulation precision and fast response speed;

In general, the servo can easily reach several thousand rated speeds. For example, the small power servo, that is, the servo within 750W, the Japanese servo is rated at 3000 rpm

A servo motor, also called an actuator motor, is an actuator in an automatic control system that converts the received electrical signal into an angular velocity output or an angul

Drive motor as one of the three core components of new energy vehicles, automotive new energy vehicle companies must always pay attention to the development of hub motor fly.

Servo motor is the main factor affecting the operation of robots, and it is also one of the key shortcomings in the demand of China's robot industry.

Scope of application: Brushless motor: It is usually used on equipment with high control requirements and high speed, such as aircraft model, precision instrumentation, etc.

Stepper motors are used in the machining industry and have a very important role in the market. What should be paid attention to in the maintenance of this material to reduce the w

The concept of the vcm motor is not clear to most people. Some people only know the use of the vcm motor and the camera, but they don't know how it is constructed and how it works.