2 Phase Nema 14 Trapezoidal Stepper Motor

Note:

1. The above are only representative products and can be made separately according to requirements.

2. You can customize the electrical parameters, winding specifications, and output shaft size and shape of the motor according to your requirements.

3. The standard product is a 4-wire motor with a step angle of 1.8 °. If requested by the customer, a 6-wire motor and a step angle of 0.9 ° can be provided as an option

4. We can match the power off brake according to your requirements.

External Drive Motor (R) Appearance and Installation Dimensions

Appearance and installation dimensions of through shaft (S) motors

Accuracy: The difference between the theoretical distance traveled based on the lead and the actual distance traveled

Axial load: the axial load aligned with the centerline of the screw

Back-driving force: A push-pull force applied axially causes the nut or screw to rotate

Backlash: Axial clearance between screw and nut

Dynamic load: the load that the screw rod bears when it moves

Screw lead: the axial travel distance of the nut when the screw rotates once

Pitch: the axial distance between adjacent threads

Radial load: load perpendicular to the centerline of the screw

Resolution: the straight-line distance that a pulse screw motor drives the load to move

Resonance: Unstable vibrations produced by a mechanical system

Static load: the load applied to the screw when the screw is at rest

Step length: the straight-line distance that the system moves when the motor takes a full step

Dimension of round Flange nut

Size of Flange nut cut on both sides

1. When the motor is connected to the driver, please do not connect the wrong phase.

2. Due to different driving conditions, the motor may have obvious heat. The surface temperature of the motor must not exceed 85°C during operation.

3. When installing the motor, be sure to use the front end cover of the motor to install the spigot for positioning, and pay attention to the tolerance fit to ensure the concentricity of the motor shaft and the load.

The 2 Phase Nema 14 Trapezoidal stepper motor comes in three lengths: 28mm, 31mm, and 42mm. It is recommended to use FYDM402T for the adapter drive model. The 2 Phase Nema 14 Trapezoidal stepper motor comes in two different shapes, as well as nuts with circular flanges and double-sided cutting flanges, for users to choose from. It is widely used in automation industries such as healthcare, robotics, security equipment, 3D, textiles, etc

Hot Tags: 2 phase nema 14 trapezoidal stepper motor, China 2 phase nema 14 trapezoidal stepper motor manufacturers, factory, 2 Phase Nema 34 Trapezoidal Stepper Motor, 2 Phase Nema 17 Trapezoidal Stepper Motor, 2 Phase Nema 8 Trapezoidal Stepper Motor, Trapezoidal Screw Stepper Motor, 2 Phase Nema 14 Trapezoidal Stepper Motor, 2 Phase Nema 11 Trapezoidal Stepper Motor