2 Phase Nema 11 Ball Screw Stepper Motor

Optional Screw Lead and Basic Step Size

Ordering Example: FY28EC080BAGB-60

1. The above are only representative products and can be made separately according to requirements.

2. You can customize the electrical parameters, winding specifications, and output shaft size and shape of the motor according to your requirements.

3. The standard product is a 4-wire motor with a step angle of 1.8 °. If requested by the customer, a 6-wire motor and a step angle of 0.9 ° can be provided as an option.

4. You can match the power off brake according to your requirements.

Accuracy: The difference between the theoretical distance traveled based on the lead and the actual distance traveled

Axial load: the axial load aligned with the centerline of the screw

Back-driving force: A push-pull force applied axially causes the nut or screw to rotate

Backlash: Axial clearance between screw and nut

Dynamic load: the load that the screw rod bears when it moves

Screw lead: the axial travel distance of the nut when the screw rotates once

Pitch: the axial distance between adjacent threads

Radial load: load perpendicular to the centerline of the screw

Resolution: the straight-line distance that a pulse screw motor drives the load to move

Resonance: Unstable vibrations produced by a mechanical system

Static load: the load applied to the screw when the screw is at rest

Step length: the straight-line distance that the system moves when the motor takes a full step

 

External Drive Motor (R) Appearance and Installation Dimensions

Dimensions of flange nuts cut on both sides (flanges cut on both sides)

1. When the motor is connected to the driver, please do not connect the wrong phase.

2. Due to different driving conditions, the motor may have obvious heat. The surface temperature of the motor is not allowed to exceed 85%C during operation.

3. When installing the motor, be sure to use the front end cover of the motor to install the spigot for positioning, and pay attention to the tolerance fit to ensure the concentricity of the motor shaft and the load.

The body length of the 2 Phase Nema 11 Ball Screw Stepper Motor is 41mm and 48mm, and it is recommended to use FYDM402T as the suitable driver model. 2 Phase Nema 11 Ball Screw Stepper Motor can be widely used in medical instruments, laboratory instruments, communications, general equipment, imaging equipment, valve] control, printing equipment, XYZ platform, Stage lighting and other fields.